01.  BIOS Message "Portwell, Inc. PCOM-BA01 BIOS Rev.: R1.00.E1 ( 08132020 )".
02.  BIOS Message "Portwell, Inc. PCOM-BA01 TEST BIOS ( 90902T00 )".
03.  Base on PCOM-BA01 R1.00.E0 BIOS
04.  Default XHCI Compliance Mode Disable
05.  Update PMIC F/W to 03.1F.00 for I2C issue
06.  Support uCode M03506CA-16
07.  Support Change uCode M03506C9 to 36
08.  Support "SPD Write Disable" Item
09.  Support Change uCode M03506C9 to 38
10.  Update PW Codebase_08 for SATA issue
11.  Rename OEM base board product name to PCOM-BA01.
12.  Add FITC setting file to "PCOM-BA01_TXE_3.1.65.2317_1x8MB_00.xml"
13.  Support eAPI Boot Counter Function in EC RAM for PW Codebase_08
14.  Fix system hang 0x2E after updating codebase
15.  Fix temperature unit display issue
16.  Support "Active LFP" in Oem Page
17.  Default "Active LFP" to "No LVDS"
18.  Support both of New and Old memory chip
19.  Fix Display Port only work when hot-plug
20.  Add 64bits GOP version 10.0.1037.

R1.00.E3 only for HW version R000 and ZR303, do not update this bios for HW version R001 or later

1. Set default DDI type as DP++
2. Set don’t load default after RTC clear

0.0.0 only for HW version R001 or later, do not update this bios for HW version R000 and ZR303

EC F/W Ver.: PCOM-BA01_EC_R04E00

Description Fixed S3 issue

Component EOL Replacement

Update